Discuss Regs for boilers in loft space in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Didn't know there were any! Common sence would say have loft boarded out and at least have a light! BG with there health and safety will want hand rails loft ladder and a mum to hold their delicate hands!
Boiler would need a frost stat, can't think of anything else!
 
Permanent light, floor and ladder
 
not in the doc J building regs?
its written somewhere for proper loft ladder, light and flooring right upto and under installation.
 
But most importantly, make sure the customer is able to get up in the loft to repressurise or reset the boiler, lots of old people who have them in lofts aren't able to get up there!!
 
Probably find you'll have to take the ladder out to push the boiler through the loft hatch! Make sure Yer loveslave is underneath pushing up!! Because Yer don't want a boiler landing on Yer swede!!!!!
 
not in the doc J building regs?
its written somewhere for proper loft ladder, light and flooring right upto and under installation.

WB stipulate in there installation instructions I think.
 
But most importantly, make sure the customer is able to get up in the loft to repressurise or reset the boiler, lots of old people who have them in lofts aren't able to get up there!!
Get stanna to put a stair lift in, it'll be easier to get the boiler up!!!!
 
Status
Not open for further replies.

Reply to Regs for boilers in loft space in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few...
Replies
3
Views
239
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
289
Does anyone know a good, not super expensive, leak detection company in the London area?
Replies
0
Views
324
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
181
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
234

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock