Pump problems

[rogerrog]

Hi guys!

I'm new here, so pls be gentle! I have installed a showerforce 3 bar pump. I have not fitted any non return valves etc to it. When it's not in use it switches on and off!! Very annoying as this has been hardly used.
I would really appreciate some help as I have had to switch it off and pressure is not so good.

Thank you in advance!

 

[Howsie]

Was it fitted in line with the manufactures instructions?

 

[rogerrog]

Thank you for your reply, yes it was fitted to the letter. Really bemused as to why it's happening.

 

[Howsie]

Sounds faulty then. Phone up the manufacturer for assistance.

 

[glenno1]

Is it only feeding the shower

 

[rogerrog]

Hello and thank you for your reply, yes it is only feeding the shower. I have called Bristan and they told me to remove the switch float on the outlet. Clean it up and replace it. I've done that and so far no probs. I did realise that is was very clean and hardly any lime scale. I only see this as a 'service' so to speak. As problems started about a month after installation, so I really don't think it could be a prob of lime scale as they suggested.
What do you think?

 

[Howsie]

They're the experts so I'm inclined to go with what they say at first.