Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Pump constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
W

Willknapo

Hello chaps
A question about my ch pump.....it is running 247 so I am assuming there is a crossed wire somewhere, I'm using a hortsmann tiara 425 timer I'll try and up load some images
 
Does boiler have pump over run facility, if so fault could be there. If not check wiring centre. Pump and boiler should be wired to come on together.
 
Status
Not open for further replies.

Reply to Pump constantly running in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello all, So been having somewhat of a time with my Aqualisa Quartz 9.5 electric shower. A few.month ago I put up with a few problems it was...
Replies
6
Views
469
    • Like
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Replies
8
Views
669
Can anyone help, please? I'm looking for a heating system circulation pump for a domestic install, with 3 speeds, where the speed can be toggled...
Replies
6
Views
1K
I just had a quote for a new boiler install as follows I dont undertand why a 15-60 boiler pump is needed and a 25-100 pump is needed as well I...
Replies
3
Views
577
Hi, i've got a job with a Vaillant Ecotec 630 system boiler, and i don't know the full history but the house has definitely been extended...
Replies
2
Views
592
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock