Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss pressure very high. all radiators on even when trvs closed. in the Central Heating Forum area at PlumbersForums.net

Messages
29
hi all some advice

combi boiler is heating water and heating comes on fine. its an ecotec plus - vaillant

Issue - Pressure is way to high, sits at 3.3 and goes right up to 3.7 when on. im worried something bad will happen soon.

im not sure when it started, but been like this for a month or so.

every week or so ive been opening the bleed valve and letting some water out which temporarily brings it down, but back up within a day or 2.

water in on the boiler seems closed.

other symtom ive noticed is all the TRVs arent working on radiatores--- even when closed they heat up... im guessing pressure so high is causing this!


i know advice is get someone out.... but based on these clues, any ideas??
 
Boiler pressure shouldn't go to 3.7bar as its PRV (safety valve) should lift at 3bar.
"water in on the boiler seems closed.", can you post a photo of this?.
 
See pic , thanks
3F25F831-3B21-4039-A76E-56C3CA8118F0.jpeg
 
Just slacken off but do not remove the flexible hose at the right hand side and ensure no water is leaking, however little. Can you also post a photo of the pressure gauge.
 
Will slacken in a few mins. But here is the display right now. Thanks
 

Attachments

  • 8352BBB7-B656-4A5D-883A-52AFBC60A80A.jpeg
    8352BBB7-B656-4A5D-883A-52AFBC60A80A.jpeg
    135.2 KB · Views: 10
  • C571A041-03EC-405E-AC78-A430BD1865E0.jpeg
    C571A041-03EC-405E-AC78-A430BD1865E0.jpeg
    329.5 KB · Views: 12

Reply to pressure very high. all radiators on even when trvs closed. in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
251
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
275
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
209
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
282
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
432
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock