Discuss potterton promax 33 he issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

plumbbobshan

Gas Engineer
Messages
79
Afternoon lads and lasses , having some issues with this boiler . Heating working fine. Hot water keeps dropping in and out !!!
Recently had new diverter cartridge and motorised head as the hot water was going into the heating and hot water sensor (green wires) and its reaching 90 and then turning off ?
Could the plate heat exchanger need a de coke or is it something else ?
Thanks in Anticipation
 
Sounds like aslong as the diverter is working properly plate
 

Reply to potterton promax 33 he issues in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
331
Hello. I've just replaced our old Potterton EP2 CH controller with a Drayton Wiser HubR (& peripherals). The old backing plate wasn't...
Replies
1
Views
308
Hello, Looking for someone who can please help solve this problem and fix our boiler. Staffs area. CH seems fine. Boiler can be coaxed into full...
Replies
2
Views
735
Hi, Recently noticed an issue with thermostatic shower that was determined to get sorted. The shower would drop (which got worse) and would not...
Replies
4
Views
780
J
Good afternoon all, I am a commercial gas engineer so little experience with domestic (although fully qualified). I have a problem with a...
Replies
1
Views
488
Deleted member 120897
D
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock