Discuss Port valve cable extension in the DIY Plumbing Forum area at PlumbersForums.net

Messages
578
Can I ask what you guys use if you need to extend the cable that comes with a 2 or 3 port valve? I cannot find a 5 core or 6 core that has an orange core. All I can think of using is 3095Y cable and sheathing the black in orange sleeve.
 

Reply to Port valve cable extension in the DIY Plumbing Forum area at PlumbersForums.net

Similar plumbing topics

Hi, Sorry if question already answered in previous posts, but I can't find a solution to the below: We recently moved house to a new home that...
Replies
7
Views
552
Hi guys, These sleeves cover 10mm PVC central heating pipes (see picture and ignore tape measure) and I believe this is what makes it possible...
Replies
2
Views
374
Hi, I have 3 port value for HW & CH. Loft extension added many years ago so they added a T to go upstairs, only 2 rads up but 11 downstairs...
Replies
0
Views
272
Hi, I have a Vailant EcoTec Boiler with a Megaflo. These are controlled by a Honeywell controller. I have one 3 port diverter, where one of the...
Replies
5
Views
291
Hi guys. A couple of things. 1 am I better fabricating bends in 14 mm copper for my ch or are 90 degree elbows fine, ref flow, friction ect. 2...
Replies
0
Views
317
Back
Top