Discuss Pneumatic toilet flush is difficult to push in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Messages
2
I’ve installed a Geberit concealed toilet cistern. It has a pneumatic dual-flush button. The flush button is very difficult to push, once pushed it does flush but it requires a lot of effort.

Is this normal for a pneumatic flush button, can anything be done to make it easier to push?
 
Yep this is normal
 

Reply to Pneumatic toilet flush is difficult to push in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

Does anyone know where I can get one of these? Toilet is leaking into the bowl. This one pushes in with a half turn but I can't find one anywhere.
Replies
2
Views
245
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going...
Replies
1
Views
337
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
487
Hi. I need a new toilet supply line but don’t know the size type of the fitting at the shut off valve. It is not 3/8 compression. It is a plastic...
Replies
2
Views
249
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
277
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock