Search the forum,

Discuss plumbing jobs glasgow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

Craig O'Neil

hi im looking for job in plumbing as ive been laid off
 
Hi Craig & welcome to the forum.

Sorry to hear about you being laid off.

It might help if you give some idea of your qualifications and experience?

Ray
 
for got to put that down


have my own gassafe registration

Bpec water byelaws
Bpec ccn1
Bpec cen1
Bpec cpa 1
asbestos awareness

ive got fully driving licence
 
i will get his attention on this thread , but think he is here in london for the weekend so dont expect to be contacted asap
 
nothing better than enthusiasm to get you going again, i am sure some work will come to you good luck in you search craig.:)
 
Status
Not open for further replies.

Reply to plumbing jobs glasgow in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
292
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
123
Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
204
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
201
    • Like
Hello to everyone.Im a newbie here. plumbing & heating+GSR engineer.
Replies
2
Views
103
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock