Search the forum,

Discuss Plumbing Course and Gas Safe Assistance need, pay for a course or go as Junior? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
E

Elahi_1

Hi Folks,
I am very sure this question comes up a lot, but I am a little stuck.

I am looking to do my NVQ Level 2 in plumbing and Gas safe. The problem is I can not go via the college route as its far to long 2-3 years ( my nearest colleges suggest) as its part time.

I checked two companies out access training and able skills and there mix reviews about them and I do not wish to shell out money to be in a sticky position where I am running around and the teachers are not very good and ultimately not satisfied with the company / teachers and the set up.

Can anyone suggest a good company or is the best way forward to contact as many companies as possible and look to work as a junior to gain experience and possibly get the company to pay for it?

Any help would be much appreciated.

Many Thanks in advance.
Elahi
 
Okay guess I'll bite the bullet then lads lol :uhoh2: I'm sorry to say mate if you want to learn plumbing and heating properly you've got to be prepared to put the work in and that takes a minimum of 4years at college while ideally working with an plumbing and heating engineer for that time.

These companys are snake oil salesman and will tell you exactly what you want to hear to get you to sign up with them in the end it costs you alot of money and time wasted and the "qualification" they offer aren't worth much in the real world.

go on city & guilds website find the nvq level 2 plumbing page 6189 at the right hand side you should see a "where can I take this course" enter postcode of where these training companies are based and see if they are registered with C&G I'll bet you a pound to a piece of poo they aren't!
 
I've just enrolled on the plumbing studies level 2 course at my local college, it's 2 evenings a week 6-9pm for 70 weeks, you get a city & guilds technical certificate at the end of the course, but you can get the full NVQ Level 2 qualification if you are able to get work with a qualified plumber to complete the required onsite assessments as the course is identical the NVQ Level 2 including the exams, the tutors even confirmed this to me, the course costs £1125 and if you get a loan for this amount over 2 years it will cost you roughly £13 a week.
2 years at college might seem a long time but in the end you will be far better taught than on one of these fast track courses and it is far cheaper, I'm 32 so will be 34 when I finish the course, then I plan to do the level 3 which goes more into complex plumbing and incorporates gas, that's another 2 years, but when you consider retirement age could be 70 for us so to me there's plenty of time, no need to rush
 
Retirement at 70 lol

Sure I heard proposals were in place for you to work til you die at work. :)
 
Just aslong as you get the job finished before you die phil otherwise they'll resuscitate you.
 
Status
Not open for further replies.

Reply to Plumbing Course and Gas Safe Assistance need, pay for a course or go as Junior? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
  • Locked
Hi All, I am a 16 year old school leaver (Sept 23) looking for a local company to take me on as an apprentice plumber. I live in Benfleet and am looking to join a plumbing and heating engineer 4 days a week whilst I attend College to gain my level 3 plumbing and heating qualifications. if...
Replies
0
Views
56
Billy Barnard
B
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
2
Views
79
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
518
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
304
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
391
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock