Please help - how to connect flow & return pipe work correctly

[ShaunCorbs]

TRVs on rads can shut down so that's why you need a bypass on all-TRV systems. If the boiler has its own bypass then that external bypass is confusing me. I'm wondering if it has a valid technical raison d'etre, or if it was installed in a misguided attempt to ?

alot of internal bypass block very easily due to the small dia of the pass through

 

[Marty1979]

Ok guys. So if you were me would you be installing a auto bypass valve on the system even though there is an internal one? I'm not sure whether or not the isolater valve was there before the combi boiler was installed back in 2015.

 

[ShaunCorbs]

If you have all trvs yes I would install an external bypass always

 

[Marty1979]

Thanks for your input guys. Can I therefore ask from the pictures I've sent how I go about taking the radiator off of the wall and then add an auto bypass? Can I go from 15mm to 22mm (ABV is obviously 22mm) then back to 15mm? I'm just a little unsure whether or not I can just connect the flow to the return putting a ABV in between them as the radiator isn't serving any other rads along the way.

Please advise. Thank you.

 

[ShaunCorbs]

Any chance of a pic of the boiler ?

 

[Marty1979]

Any chance of a pic of the boiler ?

Thanks mate. I'm not at home but I can confirm that the boiler is a Valliant Ecotec 28 combi boiler. Do you you need a photo of the pipe work underneath or something?

Thanks again

 

[ShaunCorbs]

Thanks mate. I'm not at home but I can confirm that the boiler is a Valliant Ecotec 28 combi boiler. Do you you need a photo of the pipe work underneath or something?

Thanks again

That would be great

 

[Marty1979]

Thanks buddy I will do. Valliant technical dept said on the phone that their combi boilers don't need an additional AVB - I'm on their system boilers so not sure what to do! I basically wanted to cap off the flow and return and the radiator and pipes are not serving any other rads.

Will get a picture asap mate.

 

[Last Plumber]

Ok guys. So if you were me would you be installing a auto bypass valve on the system even though there is an internal one? I'm not sure whether or not the isolater valve was there before the combi boiler was installed back in 2015.

I thought we had discussed this ?

Is that drain tap in full socket?