Search the forum,

Discuss Please help before i loose the will, in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
ideally the pipe should be level, neither up or down.
 
thanks steve ill have to get a level out some time and have a look :)
 
If its just the hot pipe that is doing it, it could well be the pipe expanding and contracting when the hot runs through the pipe??????
 
You didn't drop something in the pipe,did you?There could be a screw,or a bit of grit rattling round in the pipe.This can cause a similar noise to what you describe.
 
i havent changed the tap yet - as the noise sounds likes its coming from the pipe - at times it more like a rushing of water (like there is to much pressure?) wants the water has come through for a while its ok,

i would get another plumber out but the wife isnt bothered - she feels its not a big issue as its only the spare toilet room thats is hardly used.

i really dont know how it can be the tap, as it has a new valve in it - what can be wrong with the tap body?!

Rushing of water eh!this is water replacing air,check the work thats been done if all else fails fit an auto air vent at the high point not usualy necessary on domestic services as they usually vent through the taps but for a tenner,well who knows
 
i have the same problem i m also overweight i m 14 my height is 5ft4inch and my wieght is 170 lbs and i don't know how to lose my weight before 2010
 
Status
Not open for further replies.

Reply to Please help before i loose the will, in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
114
S
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
163
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
316
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
236
P
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock