Search the forum,

Discuss plastic pipe and fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Id looked at them, but now you have mentioned hep, I think ill give them a miss. Hate hep with a passion.
 
been looking for somebody to give feedback on this, never used it myself but prices seem good.
 
been looking for somebody to give feedback on this, never used it myself but prices seem good.
Was ok mate inserts did not seem as tight as other makes . Also need tool to de mount like hep . Instructions say pressure test to 8 bar prefer sp fit but can't grumble for the price
 
tooststion fittings are the same try them before ordering online
 
Status
Not open for further replies.

Reply to plastic pipe and fittings in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
215
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
226
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m planning to pour a 100mm deep concrete patio on 100mm hardcore. In order to achieve the same final height to line up with the rest of the patio, I...
Replies
6
Views
270
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock