Discuss Pipe bender tool box in the Plumbing Tools area at PlumbersForums.net

Hilmors- won't go! 😢 Did you shave a bit off? Or bigger handle?
 

Attachments

  • 20210109_121712.jpg
    20210109_121712.jpg
    240.8 KB · Views: 19
Do any if you have a scrap 800mm length of 160/200mm dia waste pipe floating around in a skip somewhere, cos I could do with a piece.
Prop got a bit of 160mm underground laying about.
What’s it for? Anything interesting?

Where in London are you?
 
It’s to fit my pipe bender into, as in previous posts. I can get 3m lengths, but that’s just a waste. I think 800mm is about the correct length. Then I just need to get a couple of caps.
I am in Basingstoke.
 
It’s to fit my pipe bender into, as in previous posts. I can get 3m lengths, but that’s just a waste. I think 800mm is about the correct length. Then I just need to get a couple of caps.
I am in Basingstoke.
Ah, you’re profile said London, thought you might be a bit closer.

Do you work up this way?

I’m West London, if I’ve got it and you venture up this way, you can have it.
 
Ah, you’re profile said London, thought you might be a bit closer.

Do you work up this way?

I’m West London, if I’ve got it and you venture up this way, you can have it.
Thanks for the kind offer. Let me know if you find it. I will then work out collection or carriage.
 

Reply to Pipe bender tool box in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

    • Like
  • Sticky
We have 2 brand new cordless, battery powered press tools in stock, and flying off the shelves. Our TekTools TZ1930 & TZ1550 are packed with...
Replies
5
Views
1K
Hello I am looking to install a slimline dishwasher (integrated) into a cupboard in my kitchen. The depth of the dishwasher is 550mm and the...
Replies
22
Views
626
Hi, basic question, any insight much appreciated. Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Replies
6
Views
304
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
241
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
326
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock