Part P .....20 characters

[Timmy D]

So I’m looking to do Part P.
Who’s done it?
Any advice/recommendations?
Feedback on training centres used?

I’m West London.

Thanks chaps.

 

[ShaunCorbs]

Part p is no more bit like ncs for us you now have to do a sparky course

 

[Timmy D]

Part p is no more bit like ncs for us you now have to do a sparky course

Thanks for the reply Shaun, although I’m now confused.

Can you comment on this course?

Domestic Electrical Installer Part P Training Course | Logic4training

The Domestic Electrical Installer Part P course is ideal for domestic electrical work. Find out more here. Finance options available.

www.logic4training.co.uk

Sorry, not sure how to do a pretty link like yours.

 

[Murdoch]

Contributing as a spark some of these courses are about as useful as a chocolate fireguard

Why do you want to do this?

 

[SJB060685]

Contributing as a spark some of these courses are about as useful as a chocolate fireguard

Why do you want to do this?

Hi Murdoch. Im personally studying electricity in my spare and at my own pace. If I was to look into doing an appropriate course in the future what would you suggest? How long are we looking at for courses and what sort of price?

 

[Murdoch]

Hi Murdoch. Im personally studying electricity in my spare and at my own pace. If I was to look into doing an appropriate course in the future what would you suggest? How long are we looking at for courses and what sort of price?

What do you want to do with lecky when you've trained?

 

[SJB060685]

I wouldn't want to trade as an electrician. My trade was always oil fired appliances, however I feel its imperative to have a good understanding of electricity as well and would be good to be able to do certain wiring without the need of employing someone else.

 

[Timmy D]

Contributing as a spark some of these courses are about as useful as a chocolate fireguard

Why do you want to do this?

Hi Murdoch,

Over the last year, I’ve come to a bit of a standstill in regards to learning. I want to further my knowledge.

I’d like to be able to install fused spurs, add sockets, new lighting, extractor fans etc.

Trying to figure out what courses I need to do.

I’ve done a basic electrical safety and heating controls wiring course. Was a couple of days. Found it pretty easy and enjoyable.

I’ve been reading the NICEIC guide to domestic installation work and 17th edition British standards and on site guide.

So, any advice on the route I should take would be appreciated.

 

[Murdoch]

TBH the only way to learn is to work as a mate with a seasoned spark .... but not many will do this because they consider you a threat to their business.

what you will need is competence to design, install test AND fault find, plus the knowledge to provide certificates.

where in the uk are you?

 

[Aquarius]

where in the uk are you?

I’m West London.

He’s in West London Murdoch.