Search the forum,

Discuss oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
R

rubberman 20

I have a solid fuel central heating system which also heats the hot water.
I want to install an oil boiler to run with the solid fuel, As anyone done this and if so please can they advise if it can be done?
Thanks
 
Not fitted one of these systems myself but it's definitely possible and not unusual to see these systems out in the sticks.

Probably best to find someone who is both OFTEC (oil) and HETAS (solid fuel) qualified then they should know what they're talking about.
 
check out Dunsley [DLMURL="http://www.dunsleyheat.co.uk/neutralizerpics.htm"]dunsleyheat uk manufacturers of multifuel stoves, range cookers, boilers...[/DLMURL]
This is one way of doing it, but you need someone who knowes what they are doing to do it, it isn't a diy job!
 
Last edited by a moderator:
Status
Not open for further replies.

Reply to oil boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
286
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
322
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this for suitability. The thing is my son panics during tests/exams. Is there any book I can buy him to practice the multiple choice test for the exam? What...
Replies
3
Views
407
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to run the water line underneath. There are existing drain (and who knows what) pipes running along the same wall so I'm nervous about digging too far...
Replies
6
Views
226
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it šŸ˜¬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
262
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock