Search the forum,

Discuss Noisy Vokera Linea boiler. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
J

johnc1950

My boiler is making a rattling sound, but if I run the hot tap,the noise stops and comes back when I turn off the hot water ?
 
sounds like you need the services of a gas safe engy to check its not the boiler
 
The boiler is covered by a monthly maintenance arrangement but they won't come out unless the thing isn't working.The rattling noise has only been there since we added another radiator and my heating engineer dosed the system with an anti corrosion can.
 
The boiler is covered by a monthly maintenance arrangement but they won't come out unless the thing isn't working.The rattling noise has only been there since we added another radiator and my heating engineer dosed the system with an anti corrosion can.

could be a few things but sorry to say as your not gas safe reg you cant repair it your self

best get the person back who fitted your new rad, make sure first he is gas safe reg tho
 
The boiler is covered by a monthly maintenance arrangement but they won't come out unless the thing isn't working.The rattling noise has only been there since we added another radiator and my heating engineer dosed the system with an anti corrosion can.

could be a few things but sorry to say as your not gas safe reg you cant repair it your self

best get the person back who fitted your new rad, make sure first he is gas safe reg tho
 
Status
Not open for further replies.

Reply to Noisy Vokera Linea boiler. in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler pump menu for either 70% or 100%, so, is the pump set at either one of two fixed speed percentages or does the pump actually vary speed, (modulate)...
Replies
1
Views
143
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
137
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
128
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
119
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
199
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock