Search the forum,

Discuss No hot water for 6 weeks in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
I have an Elson Coral E boiler which works off Economy 7.

Six weeks ago there was no hot water so i got a plumber to check it. He replaced the thermostat first. Then the heater element. Still not working. He then sent round an electrician who checked all the wiring and circuit board. Then he said he's done all he can and was throwing in the towel.

The Economy 7 works as it heats my storage heater.

I contacted Elson but they said they no longer produce this boiler (11 years old) so can't help. When pressed they gave me a phone number for a plumber who said his firm were too busy. He gave me another number but the guy never got back despite promising to.

Don't know where to turn now.
 
Last edited:
They are the easiest thermal store going, getting on a bit now , who ever looked at it , must have looked hard to find a circuit board , there isnt one .
 
Got ya, fuse box lol. When you say its not working , I realise you have no hot water but is the actual cylinder hot ?
 
No. The only way I can get any water is to use the boost. The plumber wired the mains electricity to the boiler and straight away you could hear the heating element kicking in.
 
Its a long shot , has the overheat tripped ( red button top of bottom cover )
 
Status
Not open for further replies.

Reply to No hot water for 6 weeks in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
2
Views
121
S
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
2
Views
246
P
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
391
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
172
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
274
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock