- Messages
- 1,338
Looks like 3 cables to me
3rd'd! Them are cables.
Discuss No filling loop and red expansion vessel installed. How to represurrize heating? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Looks like 3 cables to me
That looked like 2 cables to me!
Looks like 3 cables to me
3rd'd! Them are cables.
OK, OK I take it all back :blush5: I can now see the stop valve below which must be on the mains coming down.Christ you've got good eyes Chris. I am only looking on my phone though.
If you have a tank in the loft it won't be a sealed system. Where is the expAnsion vessel?
4thd'd !
View attachment 26061
Agree with your point above though, if some rads are working then it's a circulation issue.
Red valve is a bypass valve, nothing to do will filling pressure. Have you got a picture of the tank in loft?
Yes.. I managed to get in loft and there's a small blank tank covered with bit of black polythene but there are no valves at all what so ever. I haven't taken the pipe insulation off to check if someone has fit the compression valve instead which can be turned on/off using screw driver as I was expecting visible lever there. Other picture shows three pipes going up to the loft. One is mains cold water.View attachment 26062View attachment 26063View attachment 26064
Reply to No filling loop and red expansion vessel installed. How to represurrize heating? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
We get it, advertisements are annoying!
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.