Search the forum,

Discuss new unvented tank should the plumber notify building control? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
154
had a unvented hw tank fitted. should the plumber have notified building control? if so how can I check?
 
It should be commissioned , signed off and fitted by a G3 qualified engineer and going through building control will depend where in UK you stay and whether the work has a building warrant.
 
Forgot to say England and Scotland have different notification laws.
 
how do I check and do they come round and check the system. I don't want to open a can of worms here and end up with the building control condemning it.
 
they wont check it if its been self certified by your installer. If they come out to sign it off you will have to pay alot of money.
 
the responsible person for ensuring notification is the house owner, but most G3 plumbers are gas safe and can notify via gas safe or oftec , however our local bc dont want to know if its a replacement cyl, and dont seem to bothered if its brand new and replacing an old ov system.
 
Status
Not open for further replies.

Reply to new unvented tank should the plumber notify building control? in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Fitted unvented hotwater cylinder building control looking forms signed it off job was in england i am qualified northern ireland send out a form to fill in what do u need to sign off in england as building control said they dont give out forms like they do in northern ireland
Replies
4
Views
218
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
153
Our kitchen mixer tap has started dripping. Like so much of the plumbing in our almost new build bungalow, it is lacking! The plumber didn't install any isolating cocks in the H&C feed to the tap so how can I identify which of the valves is passing? Shut the whole H&C water system down?
Replies
12
Views
372
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
275
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
362
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock