Discuss Natural Draught flue too close to door in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

GasmanxxxR1

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,885
Hi, I have been asked to service a boiler, the customer sent me some photos, Ideal classic with the natural draught flue, its about 150mm away from a sliding back door, the opening part.

The boiler is at least 20 years old with no reports of fumes

How would you categorise it?

Cheers
 
According to some it's either NCS or ID, depending whether POC's are not in, or are proved to be in the property
However if they aren't in and the flue is only 150mm from the door isn't there a chance (or say risk) of them going in another day?
 
You need to AR it , possible ingress of POC, advise they put CO alarm in that room
 
Status
Not open for further replies.

Reply to Natural Draught flue too close to door in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
320
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
139
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock