my new bending machine

Post new thread

Discuss my new bending machine in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Billy Bob Bob

how cools this [video=youtube;4uxAQuTZ0l8]https://www.youtube.com/watch?v=4uxAQuTZ0l8[/video]
 
Thats a cracker, i hope the robot is HETAS ,,,,,
 
Status
Not open for further replies.

Reply to my new bending machine in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

D
Replacing outdoor P-Trap Gully with Bottle Gully
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
178
DIwhYdidIstartThis
D
D
Covering shallow sewer pipe under concrete Patio
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
314
DIwhYdidIstartThis
D
A
Emergency Stop Buttons in Boiler Rooms
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
322
oz-plumber
O
S
Advice needed for a mixer Spray for kitchen ?
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
217
Lou
Lou
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
351
oz-plumber
O

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock