Discuss Milwaukee SDS Cordless in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Thanks for all the replies, i appreciate it help. I used a corded Makita previous but IV heard the cordless of these days are well up to paar. I think I might just bite the bullet and get the fuel Milwaukee cordless and get it bare, saving me fair bit of money.

Insurance are being ok but just bloody taking long!!

Sorry to hear Yorkshire Dave, I guess it's not a matter of if anymore just a matter of when.
Iv just got the m12 sds, for anything up to 10mm its unbeatable IMO, anything larger and itll foook it, so need the elec or an 18volt i guess
 
I ditched the corded about a year ago and now use cordless for everything. I use AEG which are the European brand for Ridgid in the USA and rate them highly. The SDS drill powers through a wall using a metre long 22mm drill bit when doing outside taps and both the drill and the impact driver have bags of power. It has a clutch, so won't break your arm when stuck inside a wall. They are cheaper than Milwaukee which I've not had much luck with as two of their tools I own have broken down on me in a year.
 
I ditched the corded about a year ago and now use cordless for everything. I use AEG which are the European brand for Ridgid in the USA and rate them highly.

I quite like the look and build of alot of that AEG 18v gear but the platform doesn't seem that well supported? Range of batteries, kits and bare tools etc.
 
I have the M18 fuel SDS drill, it is a beast, lots of power it will core upto 40mm but I prefer using my Marcrist DDM2 for coring as its quicker.

It drains batteries quite quick if on heavy loads so I would get 5+ ah batteries.

The only disadvantage I can see is that it is quite heavy.
 
Ridgid and AEG are the same tools and are interchangeable. Plenty of stuff like batteries on Ebay and both have websites. Homebase also sell their kit.
Can you post a link? Homebase are clearing out all their AEG 18v gear and ebay are mainly full of Chinese copies with the odd seriously overpriced original AEG battery.
 
Can you post a link? Homebase are clearing out all their AEG 18v gear and ebay are mainly full of Chinese copies with the odd seriously overpriced original AEG battery.
I got most of my AEG kit at a knocked down price when Homebase were closing their Stirling store. As well as the link below, I'm sure you can get the same on the Ridgid website.
 
Thanks I'll try the Ridgid site as I was really after just a couple 4A batteries that didn't cost an arm and a leg.
 
Thanks I'll try the Ridgid site as I was really after just a couple 4A batteries that didn't cost an arm and a leg.

any help to you g ?

 

Reply to Milwaukee SDS Cordless in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
465
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
227
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer...
Replies
2
Views
183
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...
Replies
2
Views
163
Sonya K
S
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks...
Replies
2
Views
238
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock