Search the forum,

Mars construction ltd

Post new thread

Discuss Mars construction ltd in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Sorry to hear this Ian,hope not to much,especially materials wise!,in these times there is a lot of this :disappointed:
 
Not good news mate....................... hope it does not hit you to hard!
 
the gits , tried belling you this morning ian you still not got ya phone sorted ?
 
Too much of it about at the minute. It's a real pain between getting a bad feeling and walking away and putting food on the table.

Hope you didn't get took for much.
 
Couldn't we have somewhere on here where we can list things like this. Name, area and a bit of a back story. Bit like our own gallery of rogue customers?
 
I had the same last week EDS Maintainance went under ffs just got to grin and bare it, were always the bad guys never the custards :6:
 
Status
Not open for further replies.

Reply to Mars construction ltd in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

M
Unvented discharge at high level current regs
Hi they used to say as a last resort you could discharge the D2 pipework at high level and turn it back to the wall. Similar to a combi boiler. I have just looked back through the regs this seems to have changed and it isn't mentioned now. It now mentions if at high level it should be discharged...
Replies
11
Views
267
Matt0029
M
P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
204
ShaunCorbs
ShaunCorbs
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
303
oz-plumber
O
N
Oversize kitchen sink top/drainer buying one.
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
116
turnpin
turnpin
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Forum
Tiling Tools
Tiling Advice
Tilers Talk
Electrical Blog
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock