Main water valve, cannot find it

[Sarah.sco]

Hi there,

I have just bought a flat in an old tenement building in Edinburgh. I was trying to close the cold and hot water for the tap in the kitchen so i searched underneath the sink, but there are no valves attached to the two pipes that go in the tap. I have followed the pipes and they go through a wall in the storage room (I guess it was the place where the old water tank was stored) and then the pipes go underneath the floor. In the same storage room there is a hole in the floor with the thing in the pitures. Is that the main valve for the water supply? I have tried to turn clockwise but it is stuck, is there a way to turn it off? Another question is, how do i turn off the hot water? i cannot find any valve for it.
thank you so much.

 

[rpm]

A hole in wood with something behind it is usually a sign of an isolating valve but I can't make out from the pictures.
How did you try and move it, with a screwdriver?

 

[Aire]

Bs2580 as printed on the side of the valve handle conforms to plug cocks for underground cold water services. So yes it's quite possibly the valve to isolate your incoming main, and it's likely seized as it's probably not been moved in a long time.

 

[Sarah.sco]

Bs2580 as printed on the side of the valve handle conforms to plug cocks for underground cold water services. So yes it's quite possibly the valve to isolate your incoming main, and it's likely seized as it's probably not been moved in a long time.

Thank you Craig. How can I change the kitchen tap if I cannot close the cold water and hot water. Is there any possibility to get the valve to work again? Thanks

 

[Aire]

You could spray it with a penetrating fluid like wd40 and carefully try to close the valve, you have to be careful though as you can snap the spindle.

If your in a flat, does the building have a main water service to isolate the whole building?

 

[Sarah.sco]

A hole in wood with something behind it is usually a sign of an isolating valve but I can't make out from the pictures.
How did you try and move it, with a screwdriver?

It is a laminated wood floor. I have tried to spray WD40 and turn with a pliers, but it doesn't move at all.

If your in a flat, does the building have a main water service to isolate the whole building?

I guess there is one, but there are 15 flats in the building and i don't know if i can take the water away from all. Can i contact the water supply? (which means Edinburgh council or Scottish water?)

 

[Aire]

Does the building have an owner you could contact first?

 

[Sarah.sco]

each flat has an owner. I suppose we all own the building.

 

[WC1]

Good excuse to chat to new neighbours?

 

[Sarah.sco]

Good excuse to chat to new neighbours?

true

 

[WC1]

There might be a "knack" to turning it. If not you're probably going to need to switch off the building and put in a stopcock.

 

[AMGasServices]

Do you have a communal meter room? Have a look in there.

Are you on a water meter? If so there should be an isolation valve near that.

Finally I assume you pay a service charge to the company get them in to investigate.

 

[Sarah.sco]

Do you have a communal meter room? Have a look in there.

Are you on a water meter? If so there should be an isolation valve near that.

Finally I assume you pay a service charge to the company get them in to investigate.

Yes, in Edinburgh you pay an amount for water to the Council based on the size of the house. So there is no meter for private, just for shops etc...
I don't know if in Edinburgh the company in charge is the council or Scottish water. That is what i would like to know in order to contact the correct people.
Thanks.

 

[king of pipes]

Any quality engineer will be able to sort you out it would probably mean removing the unit, I would use a electric freezing machine which forms a ice plug in the pipework enabling the replacement of the stopcock the only other option is to isolate the whole tenement block. Kop

 

[Sarah.sco]

Hi Kop, thanks for the information. It's going to be a big job so, they have to take out the laminated floor . The thing is that the bathroom in the flat is relatively new, maybe 4/5 years. Before the work in the bathroom, they had to turn off the water I think. Can a valve get stuck in this amount of time?