Search the forum,

Discuss Low Loss header- Viessmann system Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

999

Gas Engineer
Messages
83
Hi All
Looking for some advice
Looking at cascading 2 viessmann 200 system boilers together with the use of a low loss header for 2 circuits, hot water and one central heating circuit.
Tips on setup and wiring techniques.
Would the weather compensation module fitted to the boiler work with this set up ?
 
Are you a Heating engy ?
 

Reply to Low Loss header- Viessmann system Boiler in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator...
Replies
2
Views
120
Hi, I have a Worcester 28i junior boiler that has started to lose pressure, only when using the central heating. When using hot water I have no...
Replies
6
Views
238
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
258
PSxxxxxx
P
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
189
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
273
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock