Search the forum,

Discuss Loss of water and pressure in my greenstar pressurised system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Messages
3
The green light in my greenstar to pressurised system has gone out after I lost water and pressure changing a radiator and valves. I re-filled the system and pressurised it back to 1.1 bar but the green light won't come on. It briefly came on when the hot water started but went out again.
 
Have you bled all radiators? Opened valves manually? Bled the pump??? If it’s not a combi of course
 

Reply to Loss of water and pressure in my greenstar pressurised system in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
190
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
Replies
2
Views
186
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up...
Replies
2
Views
260
PSxxxxxx
P
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
361
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
417
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock