Search the forum,

Discuss Looking for trainee plumber/ plumbers mate job in Essex or London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
1
Hello my name is Sam and I have just finished my City and Guilds level 3 NVQ and am now looking to get on site experience. I have both NVQ level 2 and 3 technecal certificates, and am looking to finish the last part of the qualifications on site.

I am hard working, reliable, punctual, have great attention to detail and i am willing to learn. I have a full clean driving licence with my own car and don’t mind travelling for work. I have most tools that would be needed, my own PPE and have JIB/CSCS Card. I also have knowledge of other trades: carpentry, bricklaying, painting, basic and centeral heating electrics. I have some site experiance working with a building company on different size sites.

I live in the Thurrock, Essex and have great travel links to get anywhere in Essex/ London.
If anyone has or knows of a position or just needs a hand on a job in Essex/ London please do not hesitate to get in contact with me.

A full CV, references and portfolios can be provided if needed.
 
Status
Not open for further replies.

Reply to Looking for trainee plumber/ plumbers mate job in Essex or London in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

B
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
0
Views
24
B
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
109
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
319
S
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and pebbles!) We saw that the pipe that takes water down the gutter was visibly full to the top. He said he will return with a coil to push through...
Replies
1
Views
34
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
184
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock