Kohler freestanding bath

[plumb_know]

HI everyone,

I am trying to remove a Kohler freestanding bath which is to be refitted later but it is secured at the base with what looks like catches. I have not come across these before and cant figure how to release them so i can lift the bath.

I have taken some pictures as best as i can, hopefully someone on here can educate me on how to release these.

 

[DripsnDropsBognor]

Looks like it pushes off. As I'm looking at the first picture is say hard left but depends on which way round that split pin looking thing is facing

 

[plumb_know]

Thanks dripsndrops, that what i thought but given it some welly and cant get it to move. will let you know how it woeks if i get them off today

 

[snowhead]

Probably too late, but to me it looks like it needs pushing on the cranked end of the lever towards the screw fixing.
I'd think the cranked lever has a keyhole in it that latches over a pin in the base plate.

However I would also guess that the location of the floor fixings is critical and if they are slightly out then the bath has probably been forced into position jamming the lever

 

[plumb_know]

Thanks snowhead, yes you were right i figured it out when i enlarged the picture on my computer. Easy when you know how. you push the end in fully (some with took a bit of force) which opens up the catch allowing bath to be lifted.