Search the forum,

Discuss Kane 450 leak detector/sniffer broken? in the Plumbing Tools area at PlumbersForums.net

gmartine

Esteemed
Gas Engineer
Messages
2,340
How long do they normally last...changed the batterys but mine still churps away over an opened gas hob as if there's no leak (after calibration).
 
Does it chirp in fresh air ?
 
Sounds fecked sensors gone easier to buy a new one or try leaving the battery out for a while
 
Tbh don’t think I’ve ever had mine done will just buy a new one when this one breaks :D
 

Reply to Kane 450 leak detector/sniffer broken? in the Plumbing Tools area at PlumbersForums.net

Similar plumbing topics

I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about this one. Granddaughter just moved house and this valve decided to leak when it was closed. When open its fine. Normally I have repacked the gland on...
Replies
7
Views
191
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold then would get hot water most of the time. Changing the flow cartridge about 2 years ago (when I moved in) solved this problem enough to suffer it as...
Replies
2
Views
139
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
478
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock