N
nbwendy
I am not sure whether it is right, if we want to have a hydrostatic test to test what's the pressure the pipe and the pipe fittings can be beared.
- Thread starter nbwendy
- Start date
- Replies 4
- Views 2K
- pipe pipe fittings pressure right test
Discuss is this right? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
I am not sure whether it is right, if we want to have a hydrostatic test to test what's the pressure the pipe and the pipe fittings can be beared.
U
uug197h
looks like you have a lot of pressure on that one
N
nbwendy
yeah,more than 2.5Mpa.
D
Dave
Hello and welcome..
D
dam
No leaks great stuff
- Status
Reply to is this right? in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
My son has an apprenticeship interview for to become a plumber and heating engineer. The have said there will be a multiple choice exam for this...
Pipes for thermostat shower have been fitted at different heights. Any way of rectifying without ripping all tiles. So for clarity 15mm pipes...
- Delforkids
- Bathrooms, Showers and Wetrooms
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Hi, I seemed to have a blockage in kitchen sink. A plumber came and cleared all the pipework that is visible inside my home (there was debris and...