Search the forum,

Discuss Is that leagal? ..... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Ooooo the tension mounts.....I hope you are sat 100 Yard away with a pair of Bino's Matchless?
images
I’m alright though. But to be fair it’s not right and unsafe though.
Tick tick tick tick. Do you live close then??
not so close :)
 
Now come on after bogging it up you have to do a drive by. You can’t leave us in suspense
 
So Ron did the gas police get them
Funny enough, I have been there yesterday and nothing has changed. They said on th phone they would come out within 4h and make safe. I do not know what they did or didn’t do. I pass there this weekend just to triple check.
 
I could not be bothered to read past the end of page 2. But practically every response was wrong. That bypass bar is a "proper job" and was used extensively by the gas Board / British Gas to relocate meters to the inside when a coin meter was fitted. It is not impossible that someone has obtained one, and is using it ilegally, but only a moron would do it so visibly, implying that it is a legal reposition. There are, of course, dodgy ones available on Flea bay, but most are constructed from fittings.
 

Reply to Is that leagal? ..... in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
311
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
499
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
261
Hi bit of a weird issue, I installed a grohe bathroom tap successfully 2 months ago bought from screwfix. Last week the right hand hot tap makes a squeak noise as I turn it on or off, left tap is 100% perfect and noiseless. This grohe tap is like one unit, so no screw notch or way I can remove...
Replies
7
Views
275
  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
192
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock