Discuss Intermittent NO flow from Milano thermostatic mixer shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

The header tank water level is approx2m - 2.5m above the shower head. Is it easy to determine the head pressure ? And is head pressure gain linear ? Wonder how much I would need to raise my loft tank to make a difference. Hopefully wouldn’t need much, as sometimes it works, thanks
 
About 0.2 bar

10m is 1 bar
 
You might get just enough but you could have a cross normally held in with cir clip
 
You could have a cross circulation if you have an imbalance of pressure one could back flow through

the check valves are easy enough to remove there normally in the nuts that’s connect onto the pipework
 

Reply to Intermittent NO flow from Milano thermostatic mixer shower in the Bathrooms, Showers and Wetrooms area at PlumbersForums.net

Similar plumbing topics

V
Hi All, Hope all are doing great. I have replaced two separate tap of my bathtub by mixer tap with thermostat. Previous with two separate tabs...
Replies
2
Views
643
Deleted member 120897
D
Hello. My mixer shower (non-electric) recently started running luke warm. I know this can happen at this time of year over winter but I've been in...
Replies
1
Views
229
Hi Guy's, Looking for some advice on an issue I have having with a recently installed thermostatic mixer shower in my ensuite. Everything was...
Replies
2
Views
436
Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
345
We have a pumped shower with a thermostatically controlled mixer valve. My wife complains that when she is having a long shower (hair wash etc)...
Replies
0
Views
273
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock