Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Intergas Boilers flue integrity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

richard978

Gas Engineer
Messages
168
Do the newer intergas boilers have air / flue integrity test point on the flue. The last one I got didn't but I was told they were planning to change the design.
 
Yes they do bud its directly below the flue gas test point is a white rubber bung . Cheers kop

Screenshot_20181224-060303_Photos.jpg
 
Yes they do bud its directly below the flue gas test point is a white rubber bung . Cheers kop

View attachment 36036


Thanks, I take you install these boilers / registered installer. How do you rate them in terms of use and reliability?

I've only installed two and normally install viessmann 100w these days. The reason I ask is that someone was slating them in a merchant last month.

I've not had much experience of them and the only negative feedback from the two installs I've done is that the hot water is too hot, which was easily resolved.

My only other concern is hard water because I live in Derbyshire and kettles scale up in twelve months and even my own boiler has gone through plate heat ex changers every two years even with inline water softener. With the Integas, this would be terminal unless I was to fit a proper rechargable water softener.
 
I like them personally and have fitted several different models now you do get a slug of really hot water which could be a issue with small children but on the whole I like them , regarding scale I fit a hydropath h38 this keeps the pipes clear . Kop

Screenshot_20190109-220828_Chrome.jpg
 

Reply to Intergas Boilers flue integrity in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
300
Hi all, this is probably a daft question but I need to run my cold feed from one side of my wall mounted boiler to the other. Running it beneath...
Replies
2
Views
214
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the...
Replies
5
Views
315
I have an ideal vogue max S18 boiler and I’m considering fitting auto balancing TRVs, my question relates to the boilers pump. I see a boiler...
Replies
1
Views
185
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
282
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock