Discuss Inspection trap and rusted chamber cover in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Just one more thing here Rob. There seems to be a fair thickness of some sort of bitumen cover holding the lid firmly in place which is stopping the cover releasing. Any recommendations?
put a small volume of 95 Ron petrol..on it ...light a match chuck it and run away ..it you leave a straight petrol path from it then light the far end...do not use 97 or 99 Ron that is looney juice which I use in one if my cars when I want some fun
its easy ..see you at the other side
centralheatking
 
put a small volume of 95 Ron petrol..on it ...light a match chuck it and run away ..it you leave a straight petrol path from it then light the far end...do not use 97 or 99 Ron that is looney juice which I use in one if my cars when I want some fun
its easy ..see you at the other side
centralheatking

Why do you insist on setting things on fire? Sinister perhaps? :p:p
 
Why do you insist on setting things on fire? Sinister perhaps?
No not sinister , just my way,
Fire is a great cleanser when is controlled, I am a water engineer and will always back water against fire . Ask any Fire
expert with whom I associate with
regular...I am also familiar with intumescent barriers and the initial
chemical derivative products ...phenolic resins ..back in the mists of time 1985 ish with British Petroleum Products when we were fresh out of university...we had a ball playing with fire and stuff
Rob Foster aka centralheatking
 
Last edited:

Reply to Inspection trap and rusted chamber cover in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the...
Replies
0
Views
180
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16...
Replies
0
Views
241
Hello all, I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Replies
6
Views
293
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
227
Hello all, I’m replacing a concrete paving slab patio in the back yard. The original patio used 50mm deep concrete slabs on hardcore & sand. I’m...
Replies
6
Views
327
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock