Discuss Identifying 3/4" copper from 22mm copper. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
The stopcock wasn't too far away, but far enough for a small swimming pool to form.
Thank you folks for your help, it is invaluable.
I particularly like the end feed 3/4" to 22mm reducer idea, I shall get some post haste.
Cheers.
I may well post again.
Reply to Identifying 3/4" copper from 22mm copper. in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net
Hi,
I'm trying to connect 3/4" copper to 22mm copper in an old house. However it appears that the 3/4" is actually slightly smaller (measured at...
Hi all. I'm new to this forum. Please go easy on me👷🏼
I'm currently renovating my house and my house currently runs from old lead pipes then...
Hi all, we're doing some renovation work to our property and we wanted to install a sauna house (includes shower) in the garden, irrigation system...
I have read a few threads including one by Debbie Stano that were similar to my issue but that thread stopped a while back without any resolution...
Hi everyone. I'm installing a walk in shower, opening into shower will be on right, mixer value on right, but shower head and drain on left.
The...