ideal c35 independent

[Pete st neots]

I just installed second zone onto my ideal independent c35 original I had one hive thermostat now I added two two port valves ( with Bypass) and two hive thermostat V3

it wired into a wiring centre looking at the wiring on the boiler shall I put back the room stat/ timer loop back in as original ?

also one zone is underfloor heating, the pump needs to go in the switch live on the wiring zone ?

Pete

 

[ShaunCorbs]

just use your old hive wiring unless you had an on board timer ?

 

[Pete st neots]

just use your old hive wiring unless you had an on board timer ?

just use your old hive wiring unless you had an on board timer ?

I wiring to this

 

[ShaunCorbs]

Yes but your boiler should already have a cable going to the old hive this is your live neutral earth and switch in the drawing so it worked before so nothing to modify with the boiler unless it had an inbuilt timer

 

[Pete st neots]

Yes but your boiler should already have a cable going to the old hive this is your live neutral earth and switch in the drawing so it worked before so nothing to modify with the boiler unless it had an inbuilt timer

thanks as I thought . was bit late tonight ,started doubt myself decided go down pub watch second half in work gear lol cheers Pete