Discuss How to remove Danfoss TRV in the Central Heating Forum area at PlumbersForums.net

Hi all,

Hope you are all well.

I am trying to remove this Danfoss TRV, but struggling to work it out. I assume I need to turn the grey collar, but don't want to mess too much, unless certain.

Thanks


IMG20220904093940.jpg
 
Turn the white collar to the left of the grey until it stops trv head should wobble then you can wobble and pull off
 

Reply to How to remove Danfoss TRV in the Central Heating Forum area at PlumbersForums.net

Similar plumbing topics

The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new...
Replies
1
Views
271
  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
221
Hi, Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Replies
1
Views
170
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to...
Replies
9
Views
323
I have had a look at previous posts and think I know the answer to this but just before I make it worse could I just check what you think about...
Replies
7
Views
257
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock