Search the forum,

Discuss how to find work in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
C

chaingang86

just a question thats probably been done to death but how do you guys go about finding work as i think trust a trader and the like are robbing b5stards thanks in advance
 
Its the age old question but
once word gets about that your trustworthy and do a good quality job -

work finds you !

More and more im finding i get calls from recommendation.
I don't use trust a trader or any of them, some swear by them and i may be missing out - I'll never know.....
 
I get all of my work from recommendations and a good web site. I cant keep up with the amount of work I have now and I don't advertise anywhere. Its very hard when you start up, it takes a long time to build up a customer base and their are no short cuts.
 
i have 1, emergency contract
1, national (local) pro-active contract
1, estate agent,
1, landlord
£25k

and private customers.

only advertise in one place/organisation for £350pa
plus freeindex

4 of those pay more than i would charge to privates!
 
I use checkatrade and was very sceptical at first about it but i do get quite a bit of work from it now.
I do use couple other minor bits n bobs but not much .
 
mainly word of mouth..
also get a few jobs off facebook from those pages like "for sale or wanted in (yourtown)"
 
Status
Not open for further replies.

Reply to how to find work in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
168
Hi guys....we have an old Astracast sink top....I think its a composite sink....has a big single bowl. My wife thinks it looks scruffy....looks ok to me.....sound but the bowl has seen a lot of work. So she wants a new one...Astracast it seems are no more. The problem is its size.....looked...
Replies
2
Views
173
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
376
P
  • Question
Boiler is SIRIUS THREE FS 70 Potterton commercial. Situation: We are small building contractors and my labourers managed to damage the radiator pipes during the strip out. Not the end of the world as damages happens. I am responsible builder and paying my bills and to repair the damages if...
Replies
1
Views
48
I want to reconnect some outbuildings to an existing water supply. The supply pipe is old 22mm MDPE and buried for a fair distance so not going to dig it up and replace it 😬. Question is can I use normal 22mm plumbing push-fit connectors to make the connection as finding 22mm MDPE fittings...
Replies
1
Views
291
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock