H
haydencookdonna
Problem is I can only get heating, when tank stat is calling for hot water. I've got a Baxi Solo, with Drayton controller, and Honeywell room and tank stats, and a Honeywell mid position 3 port valve. Thought the valve may be sticking, so removed the head, and the valve with pliers moves freely. when moved over makes no difference, to heating or not. Voltage to room stat ok. Voltages at 3 port as follows.
ch+hw on White 234v Green 51v Orange 237v.
ch+hw off W 3v G 240V O 77v.
Hw only on. W 5.7v G 240v O 77v.
Ch only on. W 240v G240v O 80v.
Motor on head seems to move when not attached to valve body.
It's freezing, and i'm fed up drawing off hot water every hour or two, to fire up my heating system. Help Please!!!!!!!!! Thanks in advance. Greg
ch+hw on White 234v Green 51v Orange 237v.
ch+hw off W 3v G 240V O 77v.
Hw only on. W 5.7v G 240v O 77v.
Ch only on. W 240v G240v O 80v.
Motor on head seems to move when not attached to valve body.
It's freezing, and i'm fed up drawing off hot water every hour or two, to fire up my heating system. Help Please!!!!!!!!! Thanks in advance. Greg