Search the forum,

Discuss Help with broken P-shape bath screen in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
2
Hi all, first post so please be gentle! I have recently moved and the new place has a broken P-shaped screen in the bath, the glass is in very good shape and it's detached from the holder in the wall that broke in one of the ends.

I'm attaching a couple of pics for the experts to check but I'd really appreciate any advices on how I could fix the screen back into the right place and who could help me to do this. The bath is a Heritage but the screen doesn't have a brand that I could find, the curve is from 75cm from the flat to 95cm in the peak of the circle.

Thanks in advance for your help,
David
IMG_9659.jpg
IMG_9660.jpg
IMG_9660.jpg
IMG_9661.jpg
 
I`m unclear on what has broken, is it the hinge part on the screen or the hinge on the frame or even the frame itself?
 
My bad, the screen is not marked, the broken part is the top of the frame on the part that is attached to the wall. Hope the pics below can do a better job.
743a4b8d-a748-478b-8e19-d83c48d82c9d.jpg
4241cf5d-787c-4441-b9ab-c4bf4c68ea6e.jpg
743a4b8d-a748-478b-8e19-d83c48d82c9d.jpg
 
I would contact Heritage, most screens come with the P bath.
 
Status
Not open for further replies.

Reply to Help with broken P-shape bath screen in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
162
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I have changed the 3 port actuator Honeywell head however this doesn’t seem to have solved the issue, does this mean that the programmer is faulty? Or is...
Replies
8
Views
319
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
375
The fittings below are for a mixer bar attached to a self contained shower. i.e not a wall. The attaching screws have snapped. I could get two new brackets, dismantle that existing one and start again or I could try and re attach via those screws, removing the broken ones from the plate and wall...
Replies
1
Views
223
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock