Discuss help identifying bath mixer taps in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Messages
2
Hi all,

I'm having a lot of trouble trying to find replacement cartridges for this set of mixer taps. They were purchased approx 10 years ago. I have been told they are from ultra finishing, but they having looked at the pics state it's not one of theirs.

Any help identifying them would be greatly appreciated.

KS
 

Attachments

  • pic 1.jpeg
    pic 1.jpeg
    174.8 KB · Views: 13
  • pic 2.jpeg
    pic 2.jpeg
    139.5 KB · Views: 12
  • pic 3.jpeg
    pic 3.jpeg
    143.8 KB · Views: 11

Reply to help identifying bath mixer taps in the UK Plumbing Forum | Plumbing Advice area at PlumbersForums.net

Similar plumbing topics

Looking for any ideas to help. I've a Heatrae Sadia Hot Water tank, heated through Oil fired boiler (working fine). A week ago I reset the air...
Replies
8
Views
349
How do i replace the quarter turn cartridge on this cooke & lewis ricci bath mixer tap . Normally there is a grub screw somewhere to take the...
Replies
1
Views
528
Desperate. Can anyone help me identify this bath mixer tap? Make worn off and needs replacement cartridge. External diameter is 46mm and height is...
Replies
2
Views
955
    • Like
Hi Can anyone identify the make and model of these taps please? We have one dripping bathroom sink tap but the plumber we had couldn't find a way...
Replies
3
Views
761
I have a slow leak in the bath. Its a mixer type set up. I'm unfamiliar with the tap handles and how to access the cartridges etc. If I can work...
Replies
1
Views
286
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock