Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)

Discuss Heatline c24 warm water! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

Hobo128

Gas Engineer
Messages
302
Any help with this rubbish boiler would be helpful.
Open hot tap and water is only warm. Display says 30c . Changed diverter cartridge but no good, check plate heat which seems fine.
 
Does it fire when hot tap is opened ?
 
Have you checked temp sensor ristance ?
 
Sounds like its not going onto full burn, PCB or Gas valve maybe ??
 
Hw thermistor maybe .
What temp diff have you going in and out of the plate
 
Status
Not open for further replies.

Reply to Heatline c24 warm water! in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Question
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Replies
2
Views
196
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Replies
4
Views
280
Hi everyone, Looking for a bit of advice, recently went to a job where heating was operating when called for however not for the hot water. I...
Replies
8
Views
368
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't...
Replies
6
Views
340
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4...
Replies
9
Views
419
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock