Users can remove all display ads (not sponsors) for a small fee. Click for info (must be logged in)
Discuss hand drilling and tapping set for 1/8th and 3/8th in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Reply to hand drilling and tapping set for 1/8th and 3/8th in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Similar plumbing topics
I am in process of replacing an existing sink with a new stainless steel one. The existing tap is plumbed directly to copper which means that it...
Hello all,
I'm would like to extend an existing outside tap to another point in the garden. I'm about to pour a concrete patio and was hoping to...
Hi, basic question, any insight much appreciated.
Looking to have an outdoor tap in my front porch fed from 15mm pex coming up from suspended...
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking?
This originally happened about 12 months ago and has happened 3-4...
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is...
Newest Plumbing Threads
-
Can someone please identify what this hose is?
- Started by louisjamesbanks17
- Replies: 1
-
Blocked waste pipe - Inspection cover problem.
- Started by Urbanbassman
- Replies: 0
-
See the Stunning Before and After of These 6 Local Kitchen and Bath Makeovers- Started by Dan
- Replies: 0
-
$300,000 USD Renovation for a female boss’ semi-detached house in Yio Chu Kang
- Started by Dan
- Replies: 0
-
-
