Search the forum,

Discuss H2 boiler link up panel band new in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
4
i have a brand new H2 Panel for sale, it allows you link up a solid fuel or log burner boiler with a gas boiler or oil boiler.
I brought this for £600 just over a year ago. I have never got the chance to install it. Looking for £420, I live in Nottinghamshire. I can provide all photos if anyone is interested.
 
I would comment that I am considering fitting my own woodburner with backboiler next year but, at only £180 off list price, I probably won't be interested when the time comes and I'm certainly not interested now (don't want to store it).

No warranty, no manufacturer support, and delivery or mileage on top of that. If the OP were a friend, or lived next door, it might be different.

Probably nowt wrong with it, but if it left the factory faulty, the OP would have no way of knowing, nor would I. And, in a customer's house, the customer's paying, so I'd buy it new.

I'm just saying all this to explain why I doubt anyone on this forum will be biting (and I get the impression I'm more interested in woodburners than most on here). I think the OP will have more success through personal connexions, or ebay. But I've been wrong before, and I hope to be wrong again :)
 
Status
Not open for further replies.

Reply to H2 boiler link up panel band new in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
224
We are from Alberta, and I own an electrical company. I have been asked by a BC Mechanical P. Eng. to install an emergency STOP button at the man-door to the boiler room. It's intent is to 'halt' the operation of the boilers in the room should there be an emergency. He is demanding that I do...
Replies
5
Views
257
Every two weeks or so I have to go and top up the system because the hot taps are running cold. Boiler display is flashing 0.6 bar and I fill up to 1.3. I've had an engineer look inside the boiler and he can't see anything wrong. I've checked the pipes all over the house and cannot see any...
Replies
1
Views
133
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
195
We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
450
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock