Discuss Grundfos comfort pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

mutley racers

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
5,171
Anyone fitted these? I am looking at installing an invented cylinder in my own house and while looking at secondary returns came across these.
 
install easy a pie and worked well but always in the back of my head something more to go wrong either with the sensor or the elec in the pump head for auto
 
Best price by far I found for the Comfort Auto Adapt is Mr Central Heating but don't go for Grundfos valves set they were nearly £30.
2x 1/2" MI to C comp, 2x Lever Ball valves with a 1/2" flap type non return & a tee with drain off in-between.
 

Reply to Grundfos comfort pumps in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

Hi, I note that the Grundfos Alpha 2 requires a special plug to connect the electric wiring. Are those plugs reusable if rewiring is needed...
Replies
2
Views
454
    • Like
Hello, my Mothers heating failed in the recent UK cold snap. I found the pump was stuck. I have a question about pump orientation. The...
Replies
8
Views
678
Hi, I am currently using a Grundfos Booster Pump. This pump is fed by 2pcs of 1,000 liters water tank. Normally the pump would stop working...
Replies
0
Views
223
C
Hi everyone, My flat is located next to a communal boiler with a hot water circulator pump ( Grundfos UPS 15-50N Secondary Hot Water Circulator...
Replies
2
Views
416
ChristineLondon
C
    • Like
  • Locked
Hi, I recently fitted a new central heating circuit and ran hot and cold to the bathroom and kitchen in my property (I was a CORGI registered...
Replies
0
Views
497
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock