Search the forum,

Grant lwp switch

Post new thread

Discuss Grant lwp switch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
B

Billy Bob Bob

Anyone help me out with a part number for a CH LWP switch for a grant combi 90 v3,cant find it on HWOS site
 
Try heating world of spares. Fitted one last week. Plastic tat. I'm out or could give you the part no. Eighteen pounds something.
 
Thats the one. Pile of poop. Shears off and you have to hammer a screwdriver in to get the threaded bit out.

Expensive that one.
 
SimonG said:
Thats the one. Pile of poop. Shears off and you have to hammer a screwdriver in to get the threaded bit out.

Expensive that one.
Click to expand...

same as the worcester flow switch that some how always springs a leak on the threads
 
Status
Not open for further replies.

Reply to Grant lwp switch in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

P
Viessmann combi starts when cold, mixer, tap is opened
Recently had a Viessmann Vitodens combi boiler installed, quite often when the adjacent cold mixer tap is opened the boiler starts for a few seconds! Can anyone tell me what is causing this? And how to cure?
Replies
3
Views
204
ShaunCorbs
ShaunCorbs
jamespipe
Plumber recommendation for heat pump HWS installation
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
303
oz-plumber
O
B
POTTERTON PROMAX 28 COMBI Boiler - Hot Water Issue
Hello, I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer warming up. The heat exchanger has been changed 6 months ago, so I do not believe it is that. Does anyone have any ideas on what it could be? Thanks
Replies
4
Views
232
oz-plumber
O
Stigster
Does anyone know the name of this model of Roca toilet?
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
140
Stigster
Stigster
dreikher
Hole in copper pipe, solder under floor, T coupling & protection
I was stupid enough not to check the position of the pipes under the tiles when installing a toilet and drilled right through the center of a 16 mm copper water pipe. I exposed the pipe by removing a ~30cm section of the plastic sleeve and a ~10 cm section of the pipe around the hole. Several...
Replies
0
Views
190
dreikher
dreikher
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Tilers Talk
Tile Cutters
Tilezine Tiling News Tile Association
Plumbing Advice
Electrical Forum for Electrical Advice
Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock