Discuss glow worm condensing boiler energy saver 40 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
- Status
-
Not open for further replies.
i have a condensing boiler, glow worm energy saver 40. The demand light will not come on unless i turn the water temp to 0. I bought a pcb today for 77 pounds, the one that contains the stat neon light etc. This made no difference. I have tried a replacement fuse on the pcb which also made no difference. Any ideas how to fix the problem.
- Status
-
Not open for further replies.
Reply to glow worm condensing boiler energy saver 40 in the Plumbing Jobs | The Job-board area at PlumbersForums.net
Hello,
I am seeking some advice, I have a POTTERTON PROMAX 28 COMBI Boiler and I noticed yesterday that the water around the house is no longer...
Ideal Logic 24, Previous problem was that the hot water was only cold or barely warm if the heating was in use. If heating was off and boiler cold...
Hi,
Later this year I am going away for a 2 week holiday and as the weather will be warm there is no need for the heating to be on and arguably...
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two...
