Search the forum,

Discuss Gas training courses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
M

markd

Hi

Can anybody give me some genuine feed back on these gas training courses ie OLCI ? ACCESS TRAINING ? RFT etc i am only interested in people who have taken these courses. I am looking for there genuine feed back as to how the course is run ? the cost ? and did the training centre deliver the full gas qualification ? As i am trying to find a gas training centre as near to hereford as possible. I am looking to go fast track due to my age i am not the type of person who thinks good or bad things regarding fast track as everybody needs to train some were if its a 1 or 2 days a week at college for 3 years or the full time fast track as i am wanting some good training to gain the qualification which will then enable me to get a job with a gas engineer to further my knowledge / experience. Also if there is any fully qualified gas engineers in and around hereford. who is busy and could do with a hand i would gladly assist for FREE well little money i don`t mind if i assist with a back log of any basic plumbing jobs you may have i have my own van and tools.


Cheer`s

Mark
 
Status
Not open for further replies.

Reply to Gas training courses in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

We run a community village hall and have a large kitchen provided for the use of hirers. This includes a Lincat SLR9 gas cooker which I believe is a 23.8Kw appliance with all six burners and oven on max. This was installed some 10 years ago and has passed all subsequent Gas Safety inspections as...
Replies
5
Views
476
B
    • Friendly
Hi, I've followed this excellent forum for several years but have never posted, so decided I'd better give some details. My status is the upper end of DIY and I've a couple of house renovations under my belt (my own homes) I am retired but do volunteer handyman jobs for the elderly. Not...
Replies
2
Views
95
Hi all. Hope you have all been keeping well. A while back I decided I only wanted to fit one brand of boiler and decided on Viessmann due to space for servicing and changing parts if ever needing to. I am finding my decision rather hard due to the different clearances on flue runs and cupboards...
Replies
9
Views
212
Hi all, I'm installing a concrete patio out back. By the wall under the kitchen sink I have an existing P-Trap gully for the grey water from the sink, dishwasher, washing machine etc. When I pour the concrete there won't be any chance to dig it up anymore. From my own research I get the...
Replies
0
Views
119
Hi, Can anyone advise as to why the cold water to my bathroom keeps airlocking? This originally happened about 12 months ago and has happened 3-4 times since. It’s an upstairs bathroom, fed from a tank in the attic. The tank is about 8 Meters away and feeds a bath, sink and toilet. The tank...
Replies
9
Views
339
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock