Search the forum,

Discuss Gas portfolio placement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.
Messages
3
Hi,
I need a gas safe engineer to complete my on site portfolio. I reside in the north west.

Is there anyone willing to assist me. Please contact me.
Many thanks
 
Did you post a couple of days ago
 
Might have to give more info mate. What plumbing (background) experience you have? Where are you specifically, North West is a big place? What have you done thus far in terms of gas? It’s a bit more than someone taking you on there is a lot of liability involved. I’m afraid you’re a bit far from me. But good luck
 
There is no point to make threads every week. I'm afraid, no one can help you at this point.
The only thing I can advice, call local companies and ask to shadow them while they are working.
PS. but keep in mind, not everyone, after they gas certified, continue to follow the right procedure. You should follow all the steps and make LOTS of pictures of you doing everything.

Good luck!
 
Yep please use your first one
 
Status
Not open for further replies.

Reply to Gas portfolio placement in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Similar plumbing topics

  • Article
A Plumber Who Worked Illegally Gets A Suspended Sentence After Falsely Claiming To Be Gas Safe Registered. A Plumber in Herefordshire was prosecuted after Hereford Trading Standards Team found that he was falsely claiming to be on the Gas Safe Register when he was not, putting members of the...
Replies
0
Views
190
Hello plumbers in my internet. So the Mrs want a spray mixer tap in the kitchen as we had two separate taps. I changed the tap for a temporary two hole mixer but the cold water pressure is high mains fed and the hot is low pressure immersion tank fed. I've been trying to find info on what I...
Replies
2
Views
147
Hi, My current hot water system needs to be replaced. Anyone got any suggestions or can recommend any plumbers around Derrimut area that won't rip me off? An office guy recommended me to apply for government rebates and get it installed through timetosave.com.au. How reliable is this...
Replies
6
Views
311
Hi guys. I'm trying to identify a toilet model before ordering a seat for a customer. I went to what used to be a Roca stockist (they no longer are) and one of the guys there reckoned it might be "The Gap". I went to the new stockist and the guy there disagreed it was "The Gap" and that he'd...
Replies
2
Views
149
Hi all Noticed bad smell in my drain out side put my hand down and it unclogged it for now however I checked my sewer drain and after flushing my toilet a good few times nothing is going to the sewer so don't know is there a blockage or what way it works many thanks and advice would be grateful
Replies
3
Views
534
Creating content since 2001. Untold Media.

Newest Plumbing Threads

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock