Currently reading:
gas pipe

Discuss gas pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Status
Not open for further replies.

SafeGasInstall

Esteemed
Plumber
Gas Engineer
Subscribed
Messages
8,587
does any one remember the required depth of gas pipe from meter to go under the ground in order to travel to the property as gas meter is next to boundary ?

i think it was 370 mm but not sure ? is going under the ground and is not walking area /driving area too ,is going just on the side of a house ! I am thinking of using denso tape to protect from corrosion or should i sleeve it with 32 mm waist
 
As far as I can remember its 375mm minimum under a driveway or open ground, 40mm under slabs / concrete within pedestrian traffic. As long as its protected from corrosion you should be ok Stan.
 
Status
Not open for further replies.

Reply to gas pipe in the Plumbing Jobs | The Job-board area at PlumbersForums.net

Back
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock